Kent-Moore J-136-A Rear Spring Front Bushing Remover and Replacer
The inlox type of bushing requires great care in replacement, and is pressed into the spring eye under pressure. This tool is designed to eliminate the necessity of removing the spring assembly when bushing replacement is necessary. It is a small hand press, and has a specially formed center screw head which enters the center bore of the bushing and engages the outer steel shell. This special head prevents damage to the bushing during removal or replacement. For operation, the tool is installed on the spring end with the pressure plate behind the eye and the center screw engaging the bushing. Turn the center screw clockwise to remove the bushing. The replacement of the bushing is the same as the removal, except that the new bushing is started in the eye before the tool is assembled to the spring. Weight 10 lbs.